Car Oil Sucker Manual Fuel Tank Suction Hose Oil Pump Anti-static PVC Materials

Description

Description:
This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Length of inlet and outlet pipe: The inlet pipe is about 1.5 meters, and the outlet pipe is about 0.5 meters.
Joint: pure copper
Usage:
1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:
The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:
1 * Hose Liquid Transfer Manual Silicone Sucker Pump